|Alignment method||Precise core alignment and cladding alignment|
|Applicable fibers||Any common optical fibers, rubber-insulated
fibers and jumpers that meet requirements of
ITU-TG.651-653, ITU-TG.655 and ITU-TG.657.
|Optical fiber diameter||Cladding; 80-150p m, coating layer: 0.1 —3mm|
|Cutting length||5-16mm ( coated optical fiber diameter.– -C.250p
m) ;10mm ( coated optical fiber diameter: 0.25-
|Fusion splicing consum ption (typical value)||0.02dB (SMF) ; 0.01 dB ( MMF ) ; 0.04dB (DSF ) ; 0.04dB|
|Return loss||(NZDSF) Better than 60dB|
|Fusion splicing time (typical value)||7s|
|Heating time (typical value)||18s|
|Pulling force test||1.96-2.25N|
|Thermal shrinkage tube||60mm, 40mm and a series of thermal shrinkage tubes|
|Graphical display||High-performance 4.3 inch LCD|
|Magnification time||320 times/88 times|
|Fusion splicing record||10000 groups|
Battery service life
|11.1V, 6400mAh, typical value of fusion
splicing and thermal cycle is 220
Cycle charging times reach 300-500, can be
replaced by customers
|Electrode service life||Typical value is 4000 times, can be replaced by customers|
|Construction lighting||Built-in lights with high-brightness and wide lighting area|
|Working environment||Temp:-10-50°C ; hum: 0-95%RH, height above sea level:0-6000m|
|Operation interfaces||GUI graphical operation interfaces|
|External power||AC: AC100-240V, 60Hz, 0-1.5A; DC: DC10-15V|
|External port||USB / SD|
|Dimensions Weight||120mm ( W ) x 130mm ( H ) x 154mm (D)
( without rubber anti-vibration pad )
1.59kg (host engine) ,
OPTICAL FUSION SPLICER
Precise fiber core alignment, ultra-low fiber fusion splicing consumption
7s fast fusion splicing, 18s highly efficient heating.
320 times image magnification, 5mm fusion splicing for fibers of ultra-short
cutting length 300 groups of fusion splicing modes, 100 groups of heating modes.
10000 groups of fusion records, 64 images storage.
Ceramic presser foot, ceramic V-block, all-in-one fixture.
Dual-direction splicing, automatic splicing, intelligent pyrocondensation.
USB and SD card interfaces, U-disk automatic software upgrade.
Built-in modular lithium battery, supports 220 times of splicing and heating cycles.